LOVEly Dry Erase Board

Another project inspired by something I found on Pinterest.

A wonderful coworker had a baby shower today and it gave me a reason to finally make this. I was so excited! This is a dry erase board that can be updated as often as you'd like.

Supplies



1. One sheet of 12x12 paper. Not too dark or with a busy pattern. The more simple it is, the easier it will be to read on it.
2. One sheet of 12x12 paper with cut-outs. Mine had cut-outs just on the edges.
3. Letter stickers.
4. Pen or pencil.
5. Pen or marker in a color that coordinates with your paper.
6. Scissors.
7. 12x12 picture frame with a dark frame.
8. Dry erase marker.

Step One

Turn over the paper with the cut-outs and draw on the backside the shape you want to cut-out.

Cut on the line. Then, turn it over and do any touch-ups that may be needed. You know, evening out curves, getting rid of points, things like that.

Step Two

Put the cut-out paper on top of the other paper. This will help you find where the center will be.

Now, place the stickers where you want them. I always start with the letter that will be in the middle and work my way out in both directions. It helps me keep a straight line and center the word.

Now, draw a straight line that will guide you where to write on the finished project.

Step Three

Try putting it in the frame. If it doesn't fit well, trim of just a smidge off of two sides. Do this until it fits perfectly. Once you have it figure out, put it all in. And there you have it!



Now you just write on the glass with a dry erase marker and wipe it off when you want to change it.

I often see projects like this with white or other light-colored frames, but I would definitely use a dark frame so the marker doesn't dirty it up. That wouldn't be too pretty. =\

I am very happy with how this turned out. My coworker said she likes things that are "shabby chic,' so I thought the colors (dusty rose and beige) would work well for her. But it would be easy to change up the colors or theme. Let your creative loose!

Halloween Bat Wreath

Okay, so I use to be completely against wreaths. All I knew of them were the ones with big fake flowers or jingle bells or something that just did not mesh with my style. However, I have been finding tons of tutorials for wreaths that I actually like! Most are yarn-wrapped and have a few embellishments. I like things that are simple and cute, so these have been right up my alley. I was inspired by one in particular that I found and made my own, changing it up a bit.

And here is how you can do it!

Supplies
1. Foam tube from the plumbing department of a hardware store (it comes in five-foot segments or something like that).
2. Duct tape.
3. Scissors.
4. Yarn in two colors, one skein each.
5. Glue gun.
6. Stiffened black felt.
7. Light-colored chalk.
8. One sheet of paper.
9. Wreath hook.

Step One
You are going to use the foam tube and duct tape to make the wreath. It is SO much cheaper than buying a premade foam wreath! Of course, if you want to use a premade one, go ahead. It will make your life easier. Trust me.

Play around with the foam tube until you find a length that will work to make a good-sized wreath for you. I didn't measure mine (sorry), but different people like them to be different sizes. Just know that this won't work for one too small.

Cut it the length you decided on and duct tape the ends together.

Next, thank me for doing this before you so I can tell you the issues I had and how I figured to best deal with them.

My circle was not so... circular. There were two very noticeable kinks. I put some duct tape around them and it stiffened them up so they didn't kink anymore. Problem solved.

I left my wreath alone for about an hour to run an errand and returned to the ends trying to escape from the duct tape. So I wrapped it some more. I put pieces about eight inches long criss-crossed across the two ends so they could pull from opposite directions. Problem solved.

While I was handling the wreath to wrap it, I had to be very careful so I didn't squeeze it anywhere and create more kinks. Next time I make one, I will wrap the entire piece of foam in duct tape to make it sturdier. Future problem solved!

Step Two

Adhere the base-color yarn (mine was the orange) to the back of the wreath. I just used duct tape for this.

Now wrap... and wrap... and wrap... and wrap. This took awhile, but not as long as I expected. Since I was going for a bit of a sloppy look, I just threw the skein inside the wreath and back out the bottom a few time and then pushed those wrappings to meet the others.

Once you wrap it all the way around, adhere the yarn to the back of the wreath with hot glue and cut it once it cools.

Step Three

Adhere the top-color yarn (Mine was the gray) to the back of the wreath with hot glue. Once it cools, begin wrapping again. This part was more tedious since you can't just push it to meet the rest of the yarn. Try to find your own rhythm. I purposefully wrapped bits in all sorts of directions so it looked a little messier, but still neat.

Once you meet the beginning, adhere the yarn to the back with hot glue. Once cool, trim the end off. Lots of yarn left over for other projects!

Step Four

Draw some bats on a sheet of paper. I just did a google image search for clip art bats and traced one I liked. Try to find a few different sizes. Cut out the bats.

Step Five

Use the chalk to outline the bats on the felt. This was a little tricky. I held the paper down at the edges and kind of...drew lines that started on the paper and ended on the felt? I don't know how to word it. Look at the picture and you'll know what I mean.

Looks like the Bat Signal. =)

Now cut 'em out!

Step Six

Arrange the bats on the wreath to figure out how you want them. Make sure there is no chalk visible! Now just hot glue them on, let it cool, and hang it up!

I also wrapped my wreath hook with orange ribbon because the gold was just not jellin'.

I plan on making more like this for other holidays and seasons. Obviously not bats. It will be easy to change up the colors and add some felt roses, felt leaves, or whatever else you can think up.

Happy crafting!

Felt Roses

So this is one of the easiest things you can craft up yourself. And there are so many uses for it! You can make a bunch and sew them onto scarves, ballet flats, headbands, sweaters, purses. Or glue them on hair clips, picture frames, pretty much anything. I chose to use my first one to prettify up a present.

Supplies:
1. Felt (You can buy sheets at craft stores for about 30 cents each and they come in a variety of colors)
2. Scissors
3. Hot glue gun
4. Permanent marker

Step One

Plug in your glue gun so it heats up. Draw an open swirl on your felt with your permanent marker. The larger the swirl, the larger the flower will be.

Step Two

Draw a scalloped edge attached to the outer edge of your swirl. Keep in mind that you will be cutting this out inside the lines, so leave enough room to be sure you don't make the scallops touch the swirl. When you get to the center, you will need to make a circle that the bottom of the flower will rest on. Since this was my first, I had no idea how big to make the circle, so I made it bigger than I thought I would need and later trimmed it down.

Looking at it now, I didn't even draw a circle. Let me MS Paint up a better version...

Get it? Good.

Step Three

Cut it out. Be careful to stay inside the lines so you don't get permanent marker on the finished product.

See how I still cut it out even though I didn't draw it? Yeah, draw it. It'll help.

Step Four

Starting with the end that doesn't have the circle, begin rolling it up. Try to keep the bottom nice and flat so it all glues down well. Twirl it up until you reach the circle.

Step Five

Put hot glue on the bottom of the flower. Fold the circle over and press it onto the hot glue, making it the base of the flower. Once the glue cools down, you can trim off any excess from the circle. Now you can sew or glue it onto something!

Necklace Rack for Less Than $1

I had been keeping my necklaces on a store-bought rack that was quite pretty, but it left them tangled up and discouraged me from wearing them. So I've been thinking for awhile of something to make to display them in a neat manner, making them easy to get to. Found tons of ideas on Pintrest, but they all required tools or supplies that I didn't have on hand. So on my last trip to Walmart, I spotted a 5-gallon paint stirrer. A nice, flat, shapely wooden stick for 28 cents. Perfect! Pretty sure I could afford that. So here is how you make a 28-cent necklace rack (assuming you have the other supplies on hand like I did).

Supplies:
1. 5-gallon wooden paint stirring stick
2. Paint
3. Nails
4. Measuring tape or ruler
5. Ribbon
6. Stapler or hot glue
7. Hammer

Step One

Paint the stirrer in the color of your choice. I chose white. Let it dry completely before doing another coat and letting that dry as well.

(I really need to work on taking pictures as I do my projects, but I did this one over the course of a few days)

Step Two

Lay the ruler or measuring tape on the stirrer and mark of 1-inch increments in pencil.

Step Three

Staple or hot glue a ribbon to the back. Since I experimented with this first, I will tell you two things I did wrong here. 1: I tied knots on the ribbon ends. I later had to take them out to make the hammering easier. 2: I didn't staple as closely to the top as I could have. This makes it tilt forward once hung up. So, not knots and staple/hot glue close to the top. Okay? Okay.

This is more secure than it looks, btw...

Step Four

This step is best not done on your dining room table. Gather your hammer and nails, go outside, and hammer nails into the spots you marked off earlier. Make sure they will all be tilted a little bit upward when it is hung up. Downward-pointed nails = necklaces on the ground. No bueno.

See how my ribbon is sticking out of the end because I had to untie the knots here? Yep. Just trimmed that off.

Step Five

Hang it. A little more trial-and-error happened here. I first tried hanging it on one nail. Yeah, not so smart. I couldn't keep it balanced. So I used ever-so-classy clear push pins. Two of them. This helped stabilize it. Now you are ready to display your jewelry!

I never noticed how many heart necklaces I had...

DIY Mod Podge

Mod Podge. Crafters love the stuff. With all of its glorious sticky and sealing qualities, how can we not? It has so many uses! And, my firends, I've learned a way to make your own for MUCH cheaper than buying the brand-name.

Supplies:

1. Regular cheap-o school glue (I scored this for 10 cents at Walmart! Back-to-school supplies a few weeks after school started)

2. Air-tight jar (I used a pasta sauce jar, so free!)

3. Water

Step One

Empty the glue into the bottle. I let it stay upside down for several minutes until it stopped dripping.

Step Two

Fill the empty glue bottle about 3/4 full of water. Pour that into the jar. Close the lid. Shake shake shake! That's it. You're done! And if you managed to also find a ten cent bottle of glue, you now have ten cent mod podge!

Now what do you do with it? Basically, it acts as an adhesive and sealant of sorts. You can paint some on a box and adhere decorative paper to it. Let it dry, then cover with another layer to seal the paper. Here is the project I just finished today. I got a wooden plaque, painted it, and let it dry. Then I cut out some letters from scrapbooking paper I've had for YEARS. I brushed some of my new mod podge onto the surface and stuck on the letters.

Once it was dry, I brushed on another layer to seal the paper. Added a few stickers, attached a ribbon to the back, and voila!

Birthday present for a seven year old that loves purple and bugs. (Don't tell her yet! Her party is this weekend...)

Chalkboard Menu

Want to learn how to make an easy, cheap, cute, and very functional project? You do? I'm so glad! Here is how to make a chalkboard menu.

Supplies:

1. Mini cookie sheet ($1 @ Dollar Tree)
2. Chalkboard paint (~$7 @ Michael's... although I used my 40% off coupon for it, woohoo!)
3. Chalk ($1 @ Walmart for a 12 pack of colored sticks)
4. Various paint colors (I used two colors, $1 or $2 each @ Walmart)
5. Paintbrushes (You probably have on hand, but you can buy a big variety pack for $5 at Walmart)
6. Some sort of adhesive or mounting system (Mine was $3 at Walmart, but you could screw it into the wall or hot glue a ribbon to the back)

Total spent: Eh, I'll say around $11, but the paint will be used for many other projects as well. I'm considering this a $4 project, just because of the cookie sheet and adhesive.

Step One

Thoroughly wash and dry your cookie sheet. Mine was a little bent since I bought it several months ago with the intentions of putting it in the house area at work for the kids to play with, but I knew/hoped it would flatten out once it was mounted on the wall (and it did!).

Step Two

Do your first coat of chalkboard paint directly on your squeaky clean cookie sheet. Use a small brush to paint the edges of your design and a larger one to paint the middle. Make it as even and un-lumpy as you can, but I guarantee you will see brush strokes on the finished product. I think it gives it more charm, though. =)

If you want, you can of course cut out the shape you want to paint from a piece of paper and then outline it on the cookie sheet with a black permanent marker. That would give you a chance to make sure it is perfectly as you want. I was pretty confident in my ability to wing it, though.

Step Three

Wash your paint brushes out so the paint doesn't dry in them. Oh! I forgot about my new trick! I didn't have a paint tray and didn't feel like buying one. Figured I'd jimmy something up once I got home. So I took a small plate and covered it in foil. When I washed out my brushes, I simply removed the foil and tossed it. Before the next coat, I covered it in a new piece of foil. This way, I didnt't have to wash it and the fresh paint didnt't mix with the sticky or dry paint. Made my life so much easier!

Okay, so your paint brushes are now drying. Let the first coat of paint dry on the cookie sheet completely for at least an hour. 

Once dry, do a second coat, paying close attention to the edges.

Step Four

Repeat step three. Wash brushes, new foil, let paint dry for an hour.

Third coat. Again, pay close attention to the edges. Three coats was all I needed. Let this last coat dry for another hour.

Step Five

Details! Using any color you'd like, paint whatever design you want on it. I chose two shades of blue to match the rest of the kitchen. Bright colors look really good on chalkboard paint, btw. =) You don't have to use the design I did, but if you do, start with a dotted border. Then a title. Then the letters for the days of the week. Then lines to separate the days' foods.

While doing the details, I realized it would have been a lot easier/ more professional looking if I had bought some paint pens. Alas, I'm cheap. Doing it by brush worked fine for me. But if it's that important to you and you don't mind spending some extra dough, paint pens would be easier.

Step Six

Following the directions on the chalkboard paint bottle, wait at least 24 hours before using this. Then, lightly color the whole chalkboard part with chalk and wipe it clean. I guess this conditions it. While you are waiting, you can flip it over and work on whatever system you are going to use to mount it. I used little Command sticky tag things. It's essentially like Velcro that is sticky on the back, only this will come off the wall cleanly. I was happy to find it! If it was cheaper, I'd use it in my classroom as well. Our walls are terrible for staples and tape. =\

Step Seven

After you've waited 24 hours, hang it up, write your weekly menu, and enjoy! Now you and the rest of the family know what to expect and you can see what you need at the grocery store.

Did I mention it's magnetic?

Project Earring Storage

So what happened to all of my projects I said I was gonna do, huh? Yeah, I don't know either. Laziness. Since I've been home sick with nowhere to go and no energy to do anything, I've been spending a lot of time on Pintrest getting ideas for pretty much everything. Organizing, crafts, decorating, baking... literally everything. I love the site. I have so many new ideas that I want to get started on when I get better and have motivation. But I thought I'd do a post in my blog showing one of my ideas and one idea I stole from somewhere else. How I store my earrings.

Stolen idea:

I keep my studs, hoops, and some dangling earrings in ice cube trays. It makes it SO easy to keep them paired up and easy to get to. I use to put my studs on a lacy ribbon hung on the wall. It was really cute, but it wasn't convenient to hang them up easily at the end of the day. So I searched around for other ideas. I really didn't want to put them all in one container because it makes it hard to see what your options are. Then I saw this somewhere. Maybe a magazine. Maybe online. No idea. But it's perfect! Since it's not too cute, I put them in a drawer so I don't have to look at them all the time. You can stack them if you want, also.

Own idea:

Pardon the crooked picture. This is definitely cuter than ice cube trays and I love having it displayed. =) I got a cheap frame on sale at a craft store (Dollar Tree, Goodwill, garage sale, one lying around, wherever). Took out the glass and cardboard and all so all it was was the wooden frame. Stapled a piece of that plastic grid whatnot that kids use for easy cross-stitching to the back. There are a lot of colors to choose from, but I like how black shows off the earrings. Stapled a ribbon to the top. You could also use mounting hardware, but ribbons and staples are so much easier. I thought I was done after this, but I encountered a problem when I hung it up. Since the back of the frame was flush against the wall, all of the hooks of the earrings were pushed upward and fell out. Um, oops! So, to create some distance between the wall and the hooks, I put some push pins where the corners of the frame would hit the wall. Perfect!





So there you have. Two easy solutions to a problem I'm sure a lot of accessory-loving ladies have. I have an idea of something to do with all of my necklaces next, but I need to find our drill and get some supplies first... so that will have to wait. =)